Products

The CS4001 Battery Testing System comprises a multi-channel testing unit and a control/analysis program that runs under Windows® on a PC. The CS4001 measures cell voltages, terminal voltage and current. This system enables you to conduct capacity tests far more efficiently, since cell voltages are measured automatically as the test proceeds. Moreover, results are more accurate since the cells are measured more often and virtually simultaneously. Density and currents can also be entered manually or read in from DMA35N Test Units or a TMC 2001E™ Battery Management System. The system is fast-measuring, every tenth second all cells are measured and it takes only a few seconds. As a result, comparisons of cell readings are more realistic than when slower systems are used (manual systems for example).

The results are presented graphically as curves and bar charts or in tables. The tables can be printed immediately if so desired. Cells with deviant readings can be identified easily, and results obtained on different occasions can be compared with each other.

The CS4001 and TMC95™ are ideal for capacity testing when used together with the Programma TORKEL™ and ISA Test BTS200 Battery Load Unit. The TMC95™ program can start, pause and stop TORKEL™/ BTS200. These three products form a complete capacity testing system in which the TMC95™ controls testing, the CS4001 logs cell voltages, total voltage and current and the TORKEL™/ BTS200 handles discharging.

A new CS4001/63PM is now available for reduced budgets that only need max. 63 channels. It has no front panel control buts works similarly as the CS4001.

Batteries can be properly maintained more easily and efficiently using the TMC 2001E™ Battery Management System. Misread measurement values have become a thing of the past. You never have to jot anything down by hand or search for old test results. This package includes a data logger that’s ideal for testing battery cells and also the TMC95™ program that runs under Windows®.

In many ways, the convenient data logger resembles an advanced digital multimeter that can both store and process readings. In addition to cell voltages, it can store cell temperatures, density, ripple voltage and voltage drops across connections.

The TMC 2001E™ can be used for periodic inspections, discharge tests and cycling tests conducted in accordance with IEC450, IEEE1188 and similar standards. When testing is completed, you can print out all readings immediately in table form or transfer them from the TMC 2001E™ to a personal computer running the TMC95™ program under Windows®. TMC95™ stores information about the batteries and the test results in databases, and test results can be presented in the form of curves, bar charts or tables. Cells having deviant readings can be easily identified, and you can readily see how a cell’s readings change over time. A convenient cut-and-paste function enables you to transfer values to other programs running under Windows®.

The TMC 2001E is ideal for capacity testing together with the Programma TORKEL™ and ISA Test BTS200 Battery Load Units.